FixVault
Home › Genesis › 2024 › G80 2.5T Advanced › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.5L › Engine Control Module (ECM) › Repair Procedures › Adjustment › [When installing an ECM with learning experience]

[When installing an ECM with learning experience]

  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

  2. After finishing "ECM Neutral Mode", perform "Key teaching" procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")



  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "SMART KEY ")

  2. After finishing "ECM Neutral Mode", Use a key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

    (Refer to Body Electrical System - "SMART KEY ")

About FixVault