FixVault
Home › Geo › 1989 › Tracker LSi, Automatic › Repair and Diagnosis › Engine Performance › System › Basic Testing › Ignition Coil Resistance › Basic Testing › Pick-Up Coil (Metro)

Pick-Up Coil (Metro)

  1. Measure pick-up coil resistance between terminals of pick-up coil connector. If resistance is not within specification, replace distributor. See PICK-UP COIL RESISTANCE table.
  2. If resistance is within specification, check pick-up coil gap. See PICK-UP COIL AIR GAP table. Replace pick-up coil if correct specification cannot be obtained.
About FixVault