FixVault
Home › Geo › 1991 › Tracker Base, RWD › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Testing › Front Wiper Switch › Metro

Front Wiper Switch: Metro

  1. Remove 4 retaining screws from instrument cluster hood/switches panel. Pull cluster hood outward enough to disconnect wiper/washer switch harness connector.
  2. Using ohmmeter, check wiper switch positions for continuity by probing between related terminals of wiper switch connector. See WIRING DIAGRAMS  at end of article. Replace switch as required.
About FixVault