FixVault
Home › Geo › 1992 › Tracker Base, 4WD, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - Basic Testing › Ignition Checks › Pick-Up Coil/Crank Angle Sensor

Pick-Up Coil/Crank Angle Sensor

  1. Measure pick-up coil/crank angle sensor air gap. Adjust or replace distributor if gap is not .008-.016" (.20-.40 mm).
  2. Check pick-up coil/crank angle sensor resistance. See I - SYS/COMP TESTS article in the ENGINE PERFORMANCE Section.
About FixVault