FixVault
Home › Geo › 1992 › Tracker LSi, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Engine Sensors & Switches › Park/Neutral Switch

Park/Neutral Switch

  1. Disconnect negative battery cable. Disconnect switch connector located under intake manifold. This is a round connector containing 4 wires.
  2. Using ohmmeter, check for continuity between specified wires with gearshift in proper location. See PARK/NEUTRAL SWITCH CONTINUITY  table. Continuity should exist in these gears only.
PARK/NEUTRAL SWITCH CONTINUITY

Gear Position Wire Colors
Park Or Neutral Black/Yellow & Black/Red
About FixVault