Left Mirror Will Not Move In Any Direction
- Turn ignition switch to ON or ACCY position. Set power mirror selector switch to "L". Hold power mirror switch in UP position. Using a test light. probe power mirror switch connector terminal No. 7 (Brown/Red wire). If test light comes on, go to next step. If test light does not come on, replace power mirror switch.
- With power mirror switch held in UP position, probe left power mirror assembly connector terminal No. 2 (Blue wire; Brown/Red wire after splice). If test light comes on, go to next step. If test light does not come on, check for open in Blue wire (Brown/Red wire after splice) between junction connector No. 3 (located behind center of instrument panel) and left power mirror assembly. See Figure . Repair wire as necessary. If wire is okay, replace junction connector No. 3.
- With power mirror switch held in DOWN position, connect test light to battery voltage and probe power mirror switch connector terminal No. 7 (Brown/Red wire). See Figure . If test light comes on, replace left power mirror assembly. If test light does not come on, replace power mirror switch.