Shift Control Cable: Spectrum
WARNING: This page is about a different car, the 1989 Geo Spectrum, 1988 Chevrolet Spectrum, 1987 Chevrolet Spectrum, and 1986 Chevrolet Spectrum. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen adjustment nuts at control rod link. With transaxle in Neutral detent, place gearshift lever in the "N" position. Rotate bellcrank assembly clockwise to remove slack in cable.
- Tighten top adjustment nut until it makes contact with link, then tighten bottom adjustment nut until it makes contact with link. See Fig 1. Tighten nuts.