FixVault
Home › Geo › 1993 › Tracker Base, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Engine Sensors & Switches › Park/Neutral Position Switch

Park/Neutral Position Switch

  1. Disconnect negative battery cable. Disconnect switch connector located under intake manifold. Connector is round and contains 4 wires.
  2. Using ohmmeter, check for continuity between specified wires with gearshift in proper position. See PARK/NEUTRAL POSITION SWITCH CONTINUITY  . Continuity should exist in these gears only.
About FixVault