Driver-Side Inflator Module: Installation
WARNING: This page is about a different car, the 1996 Suzuki Swift, 1996 Pontiac Firefly, and 1996 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.
- To install, position driver-side inflator module onto steering wheel. Install 2 Torx head retaining screws and torque them to 89 INCH lbs. (10 N.m).
- Reconnect 2 horn wire connectors. Reinstall steering wheel side cover. Reconnect negative battery cable and activate SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM .