FixVault
Home › Honda › 1986 › Prelude Base, Standard › Repair and Diagnosis › Engine Performance › System › Pulse Air System › Component Testing › Vacuum Switch C

Vacuum Switch C

  1. Disconnect vacuum hose No. 15 to vacuum switch C and connect a hand vacuum pump to hose. Apply 12 in. Hg of vacuum to switch. Check for continuity between Black/Yellow and Blue/Black wire terminals of control box 6P connector.
  2. There should be continuity when vacuum of more than 12 in. Hg is applied, and no continuity when vacuum is released.
About FixVault