Set/Resume Switch: Prelude

Remove steering wheel. Check for continuity between terminals "A" and "C" with set switch in "ON" position. There should be continuity. Check for continuity between terminals "A" and "B" with resume switch in "ON" position. There should be continuity.
Remove steering column cover. Disconnect 2-pin and 1-pin connectors. There should be continuity between terminal "A" and pin "A", terminal "B" and pin "B, and terminal "C" and pin "C", as you turn the slip ring. See Fig 1 & Fig 2 .

Fig 1: Testing Set/Resume Switch Slip Ring

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Testing Set/Resume Switch

Courtesy of AMERICAN HONDA MOTOR CO., INC.