FixVault
Home › Honda › 1990 › Prelude Si, Standard › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Bleeding System › Air Bleeding

Air Bleeding

  1. Ensure vehicle is on level ground and automatic transmission is in Park or manual transmission is in Neutral. Block wheels and set parking brake. Turn ignition off. Connect ABS Tester (07HAJ-SG0010A) to MD13Pink 6-pin test connector, located on passenger's side of center console.
  2. Fill modulator reservoir to MAX level. Relieve accumulator line pressure. See Figure . Start engine and release parking brake. Turn ABS tester mode selector to "6". See Figure . Press brake pedal firmly and press start test button. At least 2 strong kickbacks should be felt from brake pedal.
  3. If kickbacks are not felt, repeat air bleeding procedure. If kickbacks are felt, fill modulator reservoir to MAX level. Perform system function test. See ABS FUNCTION TEST  .
About FixVault