Retrieving Trouble Codes
- Turn ignition on (without engine running). Ensure ANTI-LOCK warning light comes on. Start engine and observe ANTI-LOCK warning light. If warning light goes out, there are no trouble codes.
- If ANTI-LOCK warning light stays on, turn ignition off. Remove access cover on passenger's side of center console. Turn ignition on (without engine running). Record blinking LED sequence on control unit. See Figure .
- After ignition is turned on, a 10-second delay should exist before LED blinks. First code number indicates main code and second code number indicates sub code. Three codes can be set at one time. To recheck sequence, turn ignition off for few seconds and turn ignition on.