Control Unit Input Test No. 11
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 11
| Wire | Test Condition | Test: Desired result | Possible Cause,If result is not obtained |
|---|---|---|---|
| WHITE/ YELLOW or (RED/ YELLOW ) | Driver or passenger door opened | Check for voltage to Ground should be less than 1V. | An open in wire orFaulty door latch sw. |
| WHITE/ YELLOW or (RED/ YELLOW ) | Driver or passenger door closed | Check for voltage to Ground should be approx.5V or more. | Short to ground, Faulty doorlatch sw. or faulty ctrlunit. |