Control Unit Input Test No. 14
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 14
| Wire | Test Condition | Test: Desired result | Possible Cause,If result is not obtained |
|---|---|---|---|
| BLUE/ WHITE (3) or (RED/ WHITE) | Driver or passenger door opened | Check for voltage to Ground should be approx.5V or more. when the shoulder buckle is in the front position. | An open in the wire or Faulty front position switch |
| BLUE/ WHITE (3) or (RED/ WHITE) | Driver or passenger door closed | Check for voltage to Ground should be less than 1V, when the shoulder buckle is in the front position. | Short to ground, Faulty front position switch orFaulty Control Unit |