FixVault
Home › Honda › 1991 › Civic Base, 2D Hatchback › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Ignition System › Ignition Coil › Removal & Installation

Removal & Installation

On Accord, Civic and CRX, ensure ignition switch is in OFF position. Remove distributor cap, cap seal and leak cover. Remove 2 screws to disconnect Black/Yellow and White/Blue wires from coil primary terminals. Remove 4 screws (2 screws on Accord), and slide ignition coil out of distributor housing.

NOTE: Prelude ignition coil is externally mounted in engine compartment. Removal and installation instructions are not necessary.
About FixVault