Toe-In Adjustment: Accord
WARNING: This page is about a different car, the 1992 Honda Prelude, 1992 Honda Civic, and 1992 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
- Secure steering wheel in straight-ahead position. Measure front wheel toe-in. See WHEEL ALIGNMENT SPECIFICATIONS . If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in same direction until front wheels are in straight-ahead position and toe-in reading is correct. Tighten tie rod lock nuts. Reposition tie rod boots if they are twisted. Tighten adjusting bolts.
- Ensure parking brake is released. Check rear wheel toe-in. If rear toe-in needs adjustment, note position of adjusting bolt on rear control arm. Loosen bolt. See Fig 1. Adjust rear toe-in by turning adjusting bolt until rear toe-in is correct.