FixVault
Home › Honda › 1992 › Civic EX, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment Specifications & Procedures › Wheel Alignment Procedures › Toe-In Adjustment › Prelude (2-Wheel Steering)

Prelude (2-Wheel Steering)

  1. Check caster and camber. Adjust if necessary. See WHEEL ALIGNMENT SPECIFICATIONS . Secure steering wheel in straight-ahead position. Check rear toe-in.
  2. If adjustment is needed, hold adjusting bolt on rear lower control arm and loosen lock nut. Adjust rear toe-in by turning adjusting bolt until toe-in is correct. Install NEW lock nut, and tighten it while holding adjusting bolt.
  3. Check front toe-in. If adjustment is needed, loosen tie rod lock nuts and turn tie rods until toe-in is correct. Tighten tie rod lock nuts. Reposition tie rod boots if they are twisted.
About FixVault