Caster Adjustment: Accord
- If caster needs adjustment, raise front of vehicle and support it using safety stands. Remove lock nut on end of radius (strut) rod. See Fig 1. Remove radius rod bolts and radius rod from lower control arm.
- Adjust caster angle by increasing or decreasing adjusting shims. A 1/8" (3.2 mm) thick shim changes caster angle by 0.41 degree (25 minutes). Caster angle can be adjusted a maximum of 0.83 degree (50 minutes). Tighten radius rod bolts and lock nut.
Courtesy of AMERICAN HONDA MOTOR CO., INC.