FixVault
Home › Honda › 1993 › Prelude VTEC › Repair and Diagnosis › Body & Frame › Door Locks - Power › Testing › Door Key Switch

Door Key Switch

  1. Remove door panel. Unplug 6-pin connector from actuator. Set switch to lock position. Check continuity between terminals No. 1 and 3. Continuity should not exist. Check continuity between terminals No. 3 and 6. Continuity should exist. See Figure .
  2. Set switch to unlock position. Check continuity between terminals No. 1 and 3. Continuity should exist. Check continuity between terminals No. 3 and 6. Continuity should not exist.
About FixVault