Description & Operation

A permanent magnet motor operates each of the power windows. The driver's master switch assembly controls all of the power window motors. The passenger's window switch controls only the passenger's power window motor. If the main switch is in OFF position, only driver's window may be operated. Passenger's window cannot be controlled by passenger's window switch, but can still be controlled from driver's master switch.

Power windows may be operated for about 10 minutes after ignition switch is turned from the "II" (ON) position to the "I" (ACCESSORY) or "0" (OFF/LOCK) positions. Time delay function is operative as long as neither front door has been opened.

AUTO mode permits driver's window to be fully lowered or raised without holding switch until window has reached the end of its travel. Moving switch past its first stop will engage AUTO mode. AUTO mode is controlled by a pulser integrated in driver's window motor assembly. Pulser cannot be serviced separately.

Power window control unit is integrated in power window master control switch. Control unit is not serviced separately.