Wiper Motor Test
WARNING: This page is about a different car, the 1993 Honda Prelude. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect wiper motor 5-pin connector. Using jumper wires, connect positive battery terminal to Green/Black wire terminal and negative battery terminal to Blue wire terminal at wiper motor connector. Ensure wiper motor operates on low speed.
- Using jumper wires, connect positive battery terminal to Green/Black wire terminal and negative battery terminal to Blue/Yellow wire terminal at wiper motor connector. Wiper motor should operate on high speed. Replace wiper motor if it fails to operate.