FixVault

Left Mirror Inoperative

  1. Remove power mirror switch. DO NOT disconnect switch from harness. See POWER MIRROR SWITCH R & I  under REMOVAL & INSTALLATION. Turn ignition on. Using jumper wires, connect Black/Yellow wire to Yellow/Red wire (Blue/White wire on Coupe), and either Yellow/White or Blue/Black wire to ground.
  2. If mirror does not tilt down (or swing left), check for open in Yellow/White or Blue/Black wire between mirror switch and mirror. If wiring is okay, check mirror motor. See POWER MIRROR MOTOR  TEST. If mirror operates correctly, check mirror switch. See POWER MIRROR SWITCH TEST.