FixVault
Home › Honda › 1995 › Prelude VTEC › Repair and Diagnosis › Body & Frame › Door Locks - Power › Testing › Door Key Switch

Door Key Switch

  1. Remove door panel. Unplug 6-pin connector from actuator. Set door key lock switch to LOCK position. Check continuity between terminals No. 1 and 3. Continuity should not exist. Check continuity between terminals No. 3 and 6. Continuity should exist. See Figure .
  2. Set door key lock switch to UNLOCK position. Check continuity between terminals No. 1 and 3. Continuity should exist. Check continuity between terminals No. 3 and 6. Continuity should not exist.
About FixVault