Ignition Coil Resistance

Remove primary and secondary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "C" (Accord) of ignition coil. See Fig 1 . Resistance should be as specified. See IGNITION COIL RESISTANCE .

Check secondary resistance between terminal "A" and secondary output terminal (coil tower). See IGNITION COIL RESISTANCE . Check for continuity between "A" and "B" terminals (Odyssey and Prelude) or terminals "A" and "C" (Accord). Continuity should exist. If readings are not within specification, replace coil.

Fig 1: Identifying Ignition Coil Terminals (Accord & Prelude)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

Application	Primary	Secondary
Accord
F22B1 Engine	.4 -.6	22,000-34,000
F22B2 Engine	.6 -.8	14,000-22,000
Civic & Civic Del Sol	.6 -.8	12,800-19,200
Odyssey & Prelude	.4 -.6	22,000-34,000