FixVault
Home › Honda › 1996 › Accord DX, Standard › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Integrated Control Unit › Component Tests › Ignition Key Switch

Ignition Key Switch

  1. Remove the dashboard lower cover and knee bolster, then disconnect the 8-P connector from the main wire harness. See Fig 1 .
  2. There should be continuity between the No. 5 and No. 8 terminals when the ignition switch is inserted into the ignition key cylinder. There should be no continuity when the ignition key is removed.
Fig 1: Locating & Identifying 8-P Connector
G00147509Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault