Right Mirror Inoperative
- Remove power mirror switch. DO NOT disconnect switch from harness. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Turn ignition on. Using jumper wires, connect Yellow/Black wire to Yellow/White wire, and Blue/White (or Light Green wire) to ground.
- If mirror does not tilt down (or swing left), check for open in Blue/White (or Light Green wire) between mirror switch and mirror. If wiring is okay, check mirror motor. See POWER MIRROR MOTOR TEST. If mirror does not tilt down or swing left, repair open in Yellow/White wire. If mirror operates correctly, check mirror switch. See POWER MIRROR SWITCH TEST.