FixVault
Home › Honda › 2000 › Insight › Repair and Diagnosis › External Pages › Different car › Section 8 (Continuously Variable Automatic Transmission (CVT)) › A/T Interlock System › Park Pin Switch Test

Park Pin Switch Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 Honda Insight, 2005 Honda Insight, 2004 Honda Insight, 2003 Honda Insight, and 2002 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front console (see FRONT CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the park pin switch connector.
    Fig 1: Disconnecting Park Pin Switch Connector
    G03682082Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Shift to the P position, then check for continuity between connector terminals No. 3 and No. 4. There should be continuity.
  4. If there is no continuity between connector terminals No. 3 and No. 4, replace the parking pin switch.
  5. Shift out of the P position, and check for continuity between connector terminals No. 3 and No. 4. There should be no continuity.
  6. If there is continuity between connector terminals No. 3 and No. 4, replace the park pin switch.
About FixVault