FixVault
Home › Honda › 2000 › Insight › Repair and Diagnosis › External Pages › Different car › Section 8 (Continuously Variable Automatic Transmission (CVT)) › CVT › Speed Sensor Replacement

Speed Sensor Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 Honda Insight, 2005 Honda Insight, 2004 Honda Insight, 2003 Honda Insight, and 2002 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connectors from the CVT input shaft (drive pulley) speed sensor (A), the CVT output shaft (driven pulley) speed sensor (B), and the CVT speed sensor (C).
    Fig 1: Loosening Torque Of CVT Input Shaft (Drive Pulley) Speed Sensor, CVT Output Shaft (Driven Pulley) Speed Sensor, And CVT Speed Sensor Bolts And Torque Specifications
    G03681970Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the 6 mm bolts, then remove the speed sensors.
  3. Replace the O-rings (D) with new ones before installing the speed sensors.
  4. Install the CVT input shaft (drive pulley) speed sensor, CVT output shaft (driven pulley) speed sensor, and CVT speed sensor.
  5. Check the speed sensor connectors for rust, dirt, or oil, then connect the connectors securely.
About FixVault