Radio Remote Switch Test

Remove the two screws (A) from the radio remote switch (B).

Fig 1: Removing Screws From Radio Remote Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the radio remote switch from the steering wheel and disconnect the 2P connector (C).
Measure resistance between the No. 1 and No. 2 terminals in each switch position according to the table.

Fig 2: Measuring Resistance Between No. 1 & No. 2 Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, replace the remote switch.