Brush Holder Test

WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Using an ohmmeter, check continuity between positive and negative brush holders (brackets). See Fig 1. Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
Measure brush length. If it is not within the service limit, replace the brush holder assembly. See Fig 2.

Fig 1: Identifying Brush Holders

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Inspecting Starter Brushes

Courtesy of AMERICAN HONDA MOTOR CO., INC.