FixVault
Home › Honda › 2000 › Prelude Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft & Keyless Entry System › Component Tests › Door Lock Switch Test

Door Lock Switch Test

  1. Remove appropriate door panel. See DOOR PANEL  under REMOVAL & INSTALLATION. Remove 2 screws and remove door lock switch. Go to next step.
  2. Place door lock switch in LOCK position. Check continuity between door lock switch connector terminals. See Figure . Continuity should only exist between door lock switch connector terminals No. 1 and 2. See WIRING DIAGRAMS  . Go to next step.
  3. Place door lock switch in UNLOCK position. Check continuity between door lock switch connector terminals. Continuity should only exist between door lock switch connector terminals No. 2 and 3. Go to next step.
  4. Place door lock switch in neutral position. Check continuity between door lock switch connector terminals. Continuity should not exist between any door lock switch connector terminals. If continuity is as specified, door lock switch is okay. If continuity is not as specified, replace door lock switch.
About FixVault