Cruise Control Systems: Operation

The cruise control system will set and automatically maintain any set speed greater than 25 MPH. To set cruise control, ensure main switch is on and switch indicator light is illuminated. After reaching desired vehicle speed, depress SET switch. Cruise control indicator light will illuminate and cruise control unit will control actuator to maintain vehicle set speed. Pushing main switch off will cancel cruise control operation, erase set speed from cruise control unit memory, and turn off cruise control indicator light.

If system is temporarily disengaged by brakelight switch, clutch switch or gear position switch, pressing RESUME switch will automatically return vehicle to previously set speed. Holding RESUME switch will gradually increase vehicle speed, without having to depress accelerator pedal. This sends an acceleration signal to cruise control unit. When RESUME switch is released, system is reprogrammed for new set vehicle speed.

For gradual deceleration, without pressing brake pedal, push SET switch and hold switch until desired speed is reached. This sends a deceleration signal to cruise control unit. When desired speed is reached, release SET switch. A new vehicle speed setting will now be maintained.