FixVault
Home › Honda › 2000 › S2000 › Repair and Diagnosis › Engine Performance › System › Fuel And Emissions Systems › How to Set Readiness Codes › Catalytic Converter Monitor and Readiness Code

Catalytic Converter Monitor and Readiness Code

NOTE:
  • Do not turn the ignition switch off during the procedure.
  • All readiness codes are cleared when the battery is disconnected or when the ECM is cleared with an OBD II scan tool or the HDS.
  • Low ambient temperatures or excessive stop-and-go traffic may increase the drive time needed to switch the readiness code from incomplete to complete.
  • The readiness code will not switch to complete until all the enable criteria are met.
  • If a fault in the secondary HO2S system caused the MIL to come on, the readiness code cannot be set to complete until you correct the fault.
About FixVault