FixVault
Home › Honda › 2000 › S2000 › Repair and Diagnosis › External Pages › Different car › Section 12 (VSA (Vehicle Stability Assist) System Components) › VSA OFF Switch Test

VSA OFF Switch Test

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  3. Remove the VSA OFF switch (A) by pushing from the back side of the instrument panel.
    Fig 1: Identifying VSA OFF Switch And Bolts
    G06232201Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between VSA OFF switch 6P connector terminals No. 1 and No. 6. There should be continuity when the button is pressed, and no continuity when the button is released.
    Fig 2: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 1 And No. 6
    G06232202Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Check for continuity between VSA OFF switch 6P connector terminals No. 2 and No. 3. There should be continuity at all times.
    Fig 3: Checking Continuity Between VSA OFF Switch 6P Connector Terminals No. 2 And No. 3
    G06232203Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the VSA OFF switch in the reverse order of removal.
About FixVault