Clearing Abs Wheel Sensor DTC (HSN 1200-02)
Publication date: 2000-12-01Reference number: HSN 1200-02
CLEARING ABS WHEEL SENSOR DTC
TECHNICAL SERVICE BULLETIN
Reference Number(s): HSN 1200-02, Date of Issue:
December, 2000
CLEARING ABS WHEEL SENSOR DTCS
Model(s): Honda, All Models With ABS
Category: Honda Service News
Bulletin No.: HSN 1200-02
Date: December, 2000
SERVICE INFORMATION
When some vehicles with ABS are run on a lift, the ABS control unit can set a wheel sensor DTC(s) and turn on the ABS indicator. Some wheel sensor DTCs keep the ABS indicator on until the vehicle is driven above 7 mph.
To turn off the ABS indicator, clear the DTC with a PGM Tester, and drive the vehicle above 7 mph. When the ABS control unit gets a normal vehicle speed input from all four wheels, it completes the ABS DTC clearing procedure and turns off the indicator.