ABS Control

WARNING: This page is about a different variant/trim than selected.

Modulator unit operates in 3 ABS control modes:

Pressure Reduction Mode: TCS NO valve is open, TCS NC valve is closed, inlet valve is closed and outlet valve is open. Caliper fluid flows through outlet valve to reservoir.
Pressure Retaining Mode: TCS NO valve is open, TCS NC valve is closed, inlet valve is closed and outlet valve is closed. Caliper fluid is retained by inlet valve and outlet valve.
Pressure Intensifying Mode: TCS NO valve is open, TCS NC valve is closed, inlet valve is open and outlet valve is closed. Master cylinder fluid is pumped out to caliper.