FixVault
Home › Honda › 2002 › Insight Standard › Repair and Diagnosis › External Pages › Different car › Section 54 (Engine Lubrication System) › Oil Jet Replacement › J35A7 engine

J35A7 engine

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft from the engine block (see CRANKSHAFT AND PISTON REMOVAL ).
  2. Remove the oil jet bolt (A), then remove and discard the oil jet (B).
    Fig 1: Removing Oil Jet Bolt & Oil Jet
    G03704087Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Carefully install the new oil jet and tighten the oil jet bolt.
  4. Install the crankshaft (see CRANKSHAFT AND PISTON INSTALLATION ).
About FixVault