Camber Inspection
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Use commercially available computerized four wheel alignment equipment to measure wheel alignment (caster, camber, toe, and turning angle). Follow the equipment manufacturer's instructions.
- Check the camber angle.
Camber angle:
- Front: 0° 00'+/-30'
- (Maximum difference between the front right and left side: 0° 30')
- Rear: -0° 30'+/-45'
- If out of specification, check for bent or damaged suspension components.