Front Seat Cover Replacement: Notes
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service.
- The operation of the driver's seat position sensor must be checked after any of these actions (see OPERATION CHECK OF THE DRIVER'S SEAT POSITION SENSOR
):
- - Driver's seat position sensor replacement
- - Cover plate (front side of driver's seat slide rail) replacement
- The front passenger's weight sensor unit must be calibrated after any of the these actions (see CALIBRATING THE FRONT PASSENGER'S WEIGHT SENSOR UNIT
):
- - Front passenger's seat replacement (including any seat components)
- - Replacement of the seat weight sensors
- - Replacement of the seat weight sensor unit
NOTE:
- Seats with a side airbag have a "SIDE AIRBAG" label on the seat-back. Because the component parts (seat-back cover, cushion, etc.) of seats with and without airbags are different, make sure you install only the correct replacement parts.
- Do not repair any tears or frayed spots of the seat-back cover. If necessary, replace the seat-back cover.
- Take care not to tear the seams or damage the seat covers.
- On the passenger's seat, do not touch the OPDS sensor in the seat-back pad, and keep it away from oil. Oil can corrode the sensor causing it to fail.
- Put on gloves to protect your hands.