FixVault
Home › Honda › 2002 › Insight Standard › Repair and Diagnosis › External Pages › Different car › Section 90 (Climate Control) › General Troubleshooting Information › Check these items before using the sensor input display mode

Check these items before using the sensor input display mode

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch ON (II), and check the recirculation door function; press the recirculation button to switch from FRESH to RECIRC. The air volume and sound should change slightly.
  2. Set the temperature control knob to the desired test temperature. When selecting the test temperature, note these items:
    • "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC.
    • "Hi" temperature setting will default to MAX HOT, FLOOR, and FRESH.
    • 61 through 89°F settings will use the automatic climate control logic.
  3. Turn the ignition switch OFF.
About FixVault