TPMS Reset Procedures: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 Acura TSX, 2008 Acura TL, 2007 Acura TSX, 2007 Acura TL, and 2006 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When a tire pressure sensor is replaced or tires are rotated, the sensor ID must be memorized by the TPMS control unit. See Memorizing Sensor ID (Automatically) . If the TPMS control unit has also been replaced, the Honda Diagnostic System (HDS) or a OBD-II compatible scan tool must be used to program information into new TPMS control unit. See Memorizing Sensor ID (Using HDS) .
When the tire pressure warning light illuminates and warning message appears, immediately check air pressure of all tires and adjust to the specified pressure. Ensure warning indicators go out.