Window Antenna Repair

NOTE: To make an effective repair, the broken section must be no longer than 1 inch.

Lightly rub the area around the broken section (A) with fine steel wool, then clean it with alcohol.
Carefully mask above and below the broken portion of the window antenna wire (B) with cellophane tape (C).

Fig 1: Masking Above & Below The Broken Portion Of The Window Antenna Wire
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Mix the silver conductive paint thoroughly. Using a small brush, apply a heavy coat of paint (A) extending about 1/8" on both sides of the break. Allow 30 minutes to dry.

Fig 2: Applying Silver Conductive Paint
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity in the repaired wire.
Apply a second coat of paint in the same way. Let it dry 3 hours before removing the tape.