Power Mirror Replacement
WARNING: This page is about a different variant/trim than selected.
- Lower the door glass fully.
- Carefully pry out the mirror mount cover (A) by hand in the sequence shown. Disconnect the tweeter connector (B), and release the wire harness (C) from the hook (D).
- Remove the door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
- Disconnect the connector (A), and detach the harness clip (B). While holding the mirror (C), remove the nuts, then remove the mirror. Take care not to scratch the door.
- Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- Attach the harness clip.