FixVault
Home › Honda › 2004 › Civic Si › Repair and Diagnosis › Engine Performance › System › Fuel System & Emissions System (Hatchback) › How to Set Readiness Codes › Evaporative Emissions (EVAP) Control System Monitor and Readiness code › Procedure › When the HDS is used

When the HDS is used

  1. Connect the HDS to the vehicle's data link connector (DLC).
  2. Start the engine.
  3. Select EVAP TEST in the INSPECTION MENU with the HDS, then select the FUNCTION TEST in the EVAP TEST MENU.
    • If the functions are normal, readiness is complete.
    • If the functions are not normal, go to the next step.
  4. If the readiness code is still not set to complete, check for a temporary DTC. If there is no DTC, one or more of the enable criteria were probably not met; repeat the procedure.
About FixVault