Hood Latch Replacement

Remove the bolts securing the hood latch (A) on the body.

Fig 1: Removing Bolts Securing Hood Latch On Body
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Detach the hood opener cable (A) from the latch, then remove the latch from the body.

Fig 2: Detaching Hood Opener Cable From Latch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If equipped, disconnect the hood latch switch connector (A) and detach the harness clip (B).

Fig 3: Disconnecting Hood Latch Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the hood latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to each location of the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.
- Make sure the cable actuates the latch before you close the hood.
- Adjust the hood latch alignment (see step 3 in ADJUSTMENT ).
- Make sure the hood locks securely.
- For some models, make sure the security system operates properly with the hood opened and closed.
  
  Fig 4: Locations For Applying Multipurpose Grease On Hood Latch
  Courtesy of AMERICAN HONDA MOTOR CO., INC.