Audio Unit Removal/Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Eject the disc before removing the audio unit to prevent damaging the CD player's load mechanism.

Make sure you have the anti-theft code for the audio system, then write down the audio presets.
Remove the radio panel (see RADIO PANEL REMOVAL/INSTALLATION ).
Remove the four mounting screws (A).

Fig 1: Identifying Mounting Screws, 20P Connector And AM/FM Antenna Lead
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 20P connector (B) and the AM/FM antenna lead (C) from the audio unit.
Install the audio unit in the reverse order of removal.
Enter the anti-theft code for the audio system, then enter the audio presets. Set the clock.