Under-dash Fuse/Relay Box: Installation
- Install the relays and connect the connectors to the under-dash fuse/relay box, then install the under-dash fuse/relay box in the reverse order of removal.
- Install the removed parts in the reverse order of removal.
- Do the battery terminal reconnection procedure (see RECONNECTION ).
- If the under-dash fuse/relay box is being replaced, register the immobilizer system with the HDS (see
IMMOBILIZER KEY REGISTRATION
).NOTE: The imoes unit is built into the MICU which is part of the under-dash fuse/relay box. You must register the imoes unit when replacing the under-dash fuse/relay box, or the engine will not start.
- Confirm that all systems work properly.