FixVault
Home › Honda › 2007 › CR-V EX, 2.4 RE4 › Repair and Diagnosis › Electrical › Body Electrical › Under-Dash Fuse/Relay Box › Under-dash Fuse/Relay Box › Removal

Under-dash Fuse/Relay Box: Removal

  1. Do the battery terminal disconnection procedure (see USING THE GR8 BATTERY DIAGNOSTIC STATION ).
  2. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  3. Disconnect the connectors from the fuse side of the under-dash fuse/relay box (A).
    Fig 1: Identifying Under-Dash Fuse/Relay Box
    G06612122Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the mounting bolt, and pull the fuse/relay box away from the body.
  5. Disconnect the connectors from the back side of the under-dash fuse/relay box, then remove the under-dash fuse/relay box.
  6. Carefully remove the relays by using relay puller.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
About FixVault