Throttle Actuator Control Module Replacement

WARNING: This page is about a different car, the 2006 Honda CR-V and 2005 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
Push the tab (A), and disconnect the throttle actuator control module 16P connector (B).

Fig 1: Disconnecting Throttle Actuator Control Module 16P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts (C), and the throttle actuator control module (D).
Install the control module in the reverse order of removal.